,,

華秀塑膠為您提供詳細的Noryl PPO PX1005X物性表參數。

想了解更多的與Noryl PPO PX1005X相關的物性參數，請點擊 NORYL™ PPO產品列表。

如果您對我們的Noryl PPO PX1005X有任何疑問，或者想索取Noryl PPO PX1005X 物性表datasheet、物質安全資料證書MSDS、ROHS檢驗報告、SGS報告、REACH環保證明、FDA證明、EU法規證明、UL證書及出廠證明COC/COA報告等，敬請撥打我們的服務熱線 020-82582555，或者點擊聯系我們給我們留言。

GE Engineering plastics Physical properties directory >> NORYL™ PPO >> PX1005X Physical property table

[下載PX1005X物性表PDF] Consult PX1005X

Noryl PPO PX1005X Physical property

PPE+PS合金,無溴無氯阻燃,UL94 V0/5VA .優異的介電強度,用于電子/電氣市場的室內/室外應用。

Property

TYPICAL PROPERTIES ⁽¹⁾
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	560	kgf/cm2	ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min	420	kgf/cm2	ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min	3.1	%	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	17	%	ASTM D 638
Tensile Modulus, 50 mm/min	24400	kgf/cm2	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	810	kgf/cm2	ASTM D 790
Flexural Stress, yld, 2.6 mm/min, 100 mm span	810	kgf/cm2	ASTM D 790
Flexural Modulus	24700	kgf/cm2	ASTM D 790
Flexural Modulus, 2.6 mm/min, 100 mm span	22400	kgf/cm2	ASTM D 790
Tensile Stress, yield, 50 mm/min	53	MPa	ISO 527
Tensile Stress, break, 50 mm/min	43	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	2.8	%	ISO 527
Tensile Strain, break, 50 mm/min	12.5	%	ISO 527
Tensile Modulus, 1 mm/min	2460	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	76	MPa	ISO 178
Flexural Modulus, 2 mm/min	2480	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	119	cm-kgf/cm	ASTM D 4812
Izod Impact, notched, 23°C	30	cm-kgf/cm	ASTM D 256
Izod Impact, notched, -30°C	9	cm-kgf/cm	ASTM D 256
Izod Impact, notched 80104 +23°C	22	kJ/m2	ISO 180/1A
Charpy 23°C, V-notch Edgew 80104 sp=62mm	23	kJ/m2	ISO 179/1eA
THERMAL	Value	Unit	Standard
Vicat Softening Temp, Rate B/50	107	°C	ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed	84	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	72	°C	ASTM D 648
HDT, 0.45 MPa, 6.4 mm, unannealed	88	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	78	°C	ASTM D 648
CTE, -40°C to 40°C, flow	8.9E-05	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow	1.03E-04	1/°C	ASTM E 831
Vicat Softening Temp, Rate B/50	94	°C	ISO 306
Vicat Softening Temp, Rate B/120	97	°C	ISO 306
HDT/Be, 0.45MPa Edgew 120104 sp=100mm	88	°C	ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm	75	°C	ISO 75/Ae
Relative Temp Index, Elec	95	°C	UL 746B
Relative Temp Index, Mech w/impact	80	°C	UL 746B
Relative Temp Index, Mech w/o impact	95	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.12	-	ASTM D 792
Mold Shrinkage, flow, 3.2 mm	0.5 - 0.7	%	SABIC Method
Mold Shrinkage on Tensile Bar, xflow (2)	0.5 - 0.7	%	SABIC Method
Melt Flow Rate, 280°C/5.0 kgf	37	g/10 min	ASTM D 1238
Melt Volume Rate, MVR at 280°C/5.0 kg	37	cm3/10 min	ISO 1133
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	3.3E+16	Ohm-cm	ASTM D 257
Surface Resistivity	>1.E+16	Ohm	ASTM D 257
Dielectric Strength, in oil, 3.2 mm	17.7	kV/mm	ASTM D 149
Relative Permittivity, 50/60 Hz	2.67	-	ASTM D 150
Relative Permittivity, 1 MHz	2.53	-	ASTM D 150
Dissipation Factor, 50/60 Hz	0.012	-	ASTM D 150
Dissipation Factor, 1 MHz	0.0026	-	ASTM D 150
Arc Resistance, Tungsten {PLC}	7	PLC Code	ASTM D 495
Hot Wire Ignition {PLC)	2	PLC Code	UL 746A
High Voltage Arc Track Rate {PLC}	4	PLC Code	UL 746A
High Ampere Arc Ign, surface {PLC}	2	PLC Code	UL 746A
Comparative Tracking Index (UL) {PLC}	1	PLC Code	UL 746A
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.01	mm	UL 94
UL Recognized, 94V-0 Flame Class Rating (3)	1.47	mm	UL 94
UL Recognized, 94-5VA Rating (3)	2.99	mm	UL 94
UV-light, water exposure/immersion	F1	-	UL 746C

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	75 - 80	°C
Drying Time	3 - 4	hrs
Drying Time (Cumulative)	8	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	250 - 275	°C
Nozzle Temperature	250 - 275	°C
Front - Zone 3 Temperature	240 - 275	°C
Middle - Zone 2 Temperature	225 - 270	°C
Rear - Zone 1 Temperature	215 - 265	°C
Mold Temperature	55 - 75	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	20 - 100	rpm
Shot to Cylinder Size	30 - 70	%
Vent Depth	0.038 - 0.051	mm

[下載PX1005X物性表PDF] Consult PX1005X

Physical properties of related products: RN0712 NH7010HF N190A SE101X LEN2211 LEN2231 LEN2231 LEN2231 LEN2231 N1250 SEH80 TCN8222 HF185 EXNL0357 EXNL0357 N1150 N1150 N850 N225Z SE1V N1050 N1052P PPO534 PX2790C PX2790 PX2801Z PX2907 PX1007 SE100X SE1X PX9406P PX9406 N190X PC180X N190HX N225X SE100HX N190HF SE100P SE100V PX2795 PX2734 V081 V090 FP6130 FXN121BK FXN121LG EXNL0353 EXNL1117 LTA1350 LTA5020 NH5020 NH5120 NH6020 NH7010 PX2060 EBN90 N300X N300 SE90 LTA6020 PX9406K

Correlation search: PX1005X-111 PX1005X-701 PX1005X-BK1066 Noryl PX1005X PX1005X物性 Sabic PX1005X GE PX1005X PPO PX1005X PPO 塑膠原料 PPO 物性聚苯醚PPO PPO 樹脂

廣州華秀塑膠有限公司不僅是專業的Noryl PPO PX1005X原料供應商，亦注重技術支持及全方位的解決方案，提供從材料鑒定、模具設計、成型加工等系列幫助，亦可為客戶量身定制各特殊性能之Noryl PPO PX1005X材料，進而協助客戶提高產品竟爭力。

聯絡我們

地址:廣州市天河區中山大道中439號東圃天銀商貿大廈1720-1723室

電話:020-82582555

傳真:020-82523699

Email: sales@va-so.cn

Noryl PPO PX1005X報價 >>

常規產品

長纖增強尼龍66 長纖增強PPA
長纖增強尼龍6 長纖增強PP
長纖增強復合材料沖擊改性復合尼龍66
沖擊改性復合尼龍6 高強尼龍
沖擊改性復合尼龍沖擊改性復合材料
改性PP 改性的合金料
高溫改性塑料含氟聚合物
改性POM 改性PBT
改性PC 焊接用復合塑料
高比重復合塑料永久防靜電塑料
永久防靜電ABS 永久防靜電合金
永久防靜電POM 其他導電材料
導電尼龍導電PE,導電PP
高溫導電塑料導電POM
導電PBT 導電PC
其他非PTFE自潤滑塑料非PTFE自潤滑PA
非PTFE自潤滑聚苯醚非PTFE自潤滑PPA
非PTFE自潤滑聚甲醛非PTFE自潤滑聚碳酸酯
其他潤滑塑料潤滑尼龍
潤滑烯烴潤滑PPO(PPE+PS)
耐熱潤滑塑料潤滑POM
潤滑PBT 潤滑彈性體
潤滑PC 擠出PBT
熱傳導復合塑料其他PC
EMI/RFI屏蔽復合塑料預著色非填充樹脂

国产末成年-国产末成年女噜噜-国产目拍亚洲精品-国产目拍亚洲精品二区-国产男女-国产男女插插一级

Noryl PPO PX1005X

華秀塑膠為您提供詳細的Noryl PPO PX1005X物性表參數。